Questions and Answers for Your Kitchen & Bath Remodeling

Answers to Common Questions

We understand that you may have a lot of questions starting a remodel project. Here are some common questions and answers.

Once a design is complete, we will know exactly how long your project should take. Your designer can share this information with you. More often than not, we finish before the planned timeline. However, despite our best efforts in planning and execution, small issues can and do arise so we may not have your project completed within the planned timeline. Rest assured that every effort will be made to complete your project as close to the planned timeline as possible, so that you can use and love your new space as quickly as you can!

This can vary a bit, based on the location of your home relative to our office. Our carpenters work hours are approximately Monday - Thursday from 8:30 am - 5 pm.

No, our work is conducted Monday through Friday.

This is entirely up to you -- our policy is whatever you are comfortable with. Some clients want to be there at all times, and others want to be out of the country! From experience, we have seen that the process is less stressful for clients that don’t feel they have to be there all the time.

We recommend doing this. Moving the refrigerator and microwave to the living room, for example, along with a table for some preparation space, can make things a lot easier. We can assist with this, the same the day the old kitchen is removed, if you like. We can plan for this when we meet for the pre-production meeting in your home.

We work with several different countertop fabricators for different products, but we require them all to provide a 10-business-day turnaround, from the time the digital template is made, to the day the counter is installed. Depending on the length of the job and the scope of work, we may have everything else completed prior to this, so there may be a wait for the countertop installation. After the countertop is installed, we can complete final items, such as the installation of appliances, etc. This process can also apply to more complex bathroom vanity tops. Ask your designer how the countertop in your project will be manufactured.

We don’t generally need to do this, as the delay is only a matter of a week or so at most, and the appliances aren’t installed anyway. However, if the countertop has an unusually long lead time, whether planned or unplanned, we can install a temporary top and sink for you to use in the meantime.

The federal government outlawed lead in residential paint in 1978. Homes built prior to that could theoretically have lead paint, but by the 1950s and 1960s, manufacturers were phasing it out anyway. By law, we are required to check for the presence of lead paint on surfaces that we are removing in any home built before 1978. This is generally done at the pre-production meeting or at the start of the job. If lead is found, DreamMaker and its staff are certified to safely remove this material from the home. If your home was built before 1978, you will be provided a pamphlet titled Renovate Right: Important Lead Hazard Information for Families, Child Care Providers and Schools.

SEO

Our Unique Process

Click the button to the right learn more about our unique process.

We Love Our Customers

Stay Connected

Join our email newsletter list

Your email address will be securely stored. We do not sell or share this information with anyone. You may unsubscribe at any time by clicking on the link that is included at the bottom of every newsletter.